Welcome to the official website of Zhongshan Kairui Vacuum Equipment Co., Ltd.!


中文/EN        


National Service Hotline


139-2333-6906


变压器模具

Information dynamicsNews

URL:www.zskerry.com

Website:www.kairuiequipment.com

What are the specific operating steps of the transformer mold?

Your current position: Home page >> News >> Industry News

What are the specific operating steps of the transformer mold?

2020-03-05
times

The technical problem to be solved by the utility model is to provide an adjustable transformer mold. The transformer mold factory can solve the current traditional traditional transformer coil cord mold. Due to its simple structure, it is impossible to adjust the mold size as required.




In order to solve the above technical problems, the technical solution of the present utility model is: an adjustable transformer mold, which includes a base plate, a chute, a sliding block, a guide plate, a guide hole, a fixed plate, and an escape hole. One screw, template and second screw. The chute is located at the upper and lower ends of the base plate. The chute is a rectangular groove. The slider is located inside the chute. The slider is slidably connected to the base plate. The guide plate is a guide plate. The upper and lower ends of the base plate are welded to the base plate with the guide plate, the guide hole is located inside the guide plate, the guide hole is a rectangular through hole, and the fixing plate penetrates the left and right sides of the base plate. Chassis. The fixing plate is connected to the base plate by welding. The avoiding holes are located on the upper and lower ends of the fixing plate. The avoiding holes are round through holes. There are multiple screws. One screw is movably connected to the fixing through the avoiding hole. The template is located on the upper, lower, left, and right ends of the outer wall of the substrate, the template is movably connected to the substrate, and the template is connected with a screw, a second number of the plurality of screw members are screwed, the second screw Pass through the inside of the template and connect to the second template thread.


1594365438442789.jpg


In addition, scales are provided at the front and rear ends of the base plate, and the scales are integrally connected to the base plate.




In addition, a mounting hole is provided inside the slider, and the mounting hole is a threaded hole.




Compared with the prior art, the adjustable transformer mold can adjust the position of the template according to the winding needs of different transformer coils. The specific operation steps are as follows: first rotate a screw to separate one screw from the template, and then rotate the second screw to eliminate the pressing force on the template, that is, through the above operations, the template is active. Then, the worker pulls the template so that the template drives the second screw. The linkage slider slides left and right along the sliding groove and the guide hole. At this time, through the above operations, the left and right direction of the template can be adjusted. When the position of the template reaches the position required by the worker, one rotation of the template can be reversed. These two screws allow the second screw to fix the template again, and then screw one screw into the template. At this time, one screw and the second screw cooperate with each other to realize effective fixing of the template. Finally, it can meet the different requirements of the transformer coil winding position. The adjustable transformer mold has a smart structure, powerful functions and a large number of staff. Only by simple operation, the position of the template can be adjusted to meet the needs of different transformer coil processing. Finally, through the above, the equipment is greatly expanded while reducing the operational burden of personnel. At the same time, the practicability is to facilitate the employees to accurately adjust the position of the template.


tag

Latest browse:

Related products

Related news

Zhongshan Kairui Vacuum Equipment Co., Ltd.

未标题-4.pngAddress: No. 92, Xichong East Road, Henglan Town, Zhongshan City, Guangdong Province
未标题-5.pngPhone: 139-2333-6906
6.pngEmail:112919443@qq.com   /  zgkairui@126.com
未标题-7.pngQ Q:112919443


91.jpg



Online consultation:

Copyright © 中山市凯瑞真空设备有限公司 All rights reserved Record No:54845 Specializing inVacuum casting equipment, vacuum drying equipment manufacturer, transformer mold,Welcome to inquire! technical support:Xiangyun platform
Links: ABS电镀 电动伸缩门 pvc塑料模板 南通道闸门 涂塑复合钢管 英山酒店 福州隔墙板 盐城隔断 贵州飞天茅台53度 转运床 燃气壁挂炉价格家 泸州养老 东莞以租代购 商业地产运营管理 增压器动叶片 费斯托气缸 激光修复 苏州吹塑加工 智能机器人厂家 烟台净水 工业橡胶制品 冲压件加工 射洪燃气切断阀 陕西渣浆泵 热敏打印机芯 青岛净化铝型材 拉力测试机厂家 石家庄工商代理 叉车厂家 实验室通风净化